Detalii loc de munca
1 - CNC Operator -Programmer/milling machine with the abilities to program in Heidenhein (later on in ISO operating system) For a long term ASAP • You will be working on the following machines: MILL MACHINE Type of machine: FP4NC DECKEL/ FELMMAN PICO 54/ FELMMAN PICO 51 CNC/ FELMMAN PICO 51 DC/ HERMLE C800U/ HERMLE C600U The most used machines are FP4NC, Hermle C800U and Hermle C600U. • Milling of moulds and cores for injection moulds on traditional milling machines and on CNC milling machines. • You will operate these machines and you will be also programming CNC milling machines first in HEIDENHEIM and then in ISO operating system. - if you don’t know how to program in ISO, this can be learnt later on, but it is essential to know how to program in Heidenheim. - You start writing basis programmes, but after some time, you will be able to write independently your own more difficult program. The purpose of your work is to take in steps over the responsibilities of the employee which will go into retirement in the period of two years. • You will freeze moulds, depending to the technical specification: this means you will prepare, install, program and handle the metal peaces in order to get the right end product. • You will work in an atelier located in Sint Niklaas • You will have to work with the measurement instrument • You have to read the technical drawings correctly • You have to have experience with the smallest and finest pieces.
Language knowledge: Good English, minimum communicative! Others: • Minimum 5 years experience as a CNC freezer • Minimum 3 yeas experience as a programmer in Heidenheim • Experience with traditional milling machines and with CNC milling machines (both operating and programming in Heidenheim) • Experience with programming in ISO operating system is very welcome but not required. • You have to have the overhaul insight in the production process • You have to program independently in Heidenheim