3425

Strungar CNC la SC Schaeffler Romania SRL Brasov

CNC Turner at SC Schaeffler Romania SRL Brasov

  • România, Sfântu Gheorghe
  • România, Sfântu Gheorghe
  • Romania, Sfântu Gheorghe
  • Romania, Sfântu Gheorghe
Deblocheaza date contact
Traduceri ale CV-ului
75%
  • Ultima actualizare: 27.03.2011
  • Numar referinta: 3425

Experienta

  • mai 2010 - Prezent

    Strungar CNC, SC Schaeffler Romania SRL Brasov

    • Sfântu Gheorghe, România
    • Full time
    • Domeniu - Inginerie: Industrii / Productie

    Lucrez in cadrul segmentului WZB (Werkzeugbau)pe un strung Mori Seiki SL25 cu comanda Fanuc 15T. Cele mai multe repere constau in piese de otel, calite care necesita reprelucrari (stante, poansoane, matrite de forja), precum si piese noi. Sculele folosite sint speciale pentru materiale calite: placute ceramice sau diamantate, freze din carburi sinterizate. Precizia prelucrarilor este esentiala, la anumite piese tolerantele fiind de ordinul micronilor. Masina dispune de un sistem integrat CAM care calculeaza compensarile de scule, traiectoriile si parametrii aschierii precum si retragerile cu avans rapid. Documentatiile masinii si cele de la clienti sint de obicei in limba germana sau/si engleza.

  • septembrie 2008 - decembrie 2009

    Programator-reglor-operator CNC, SC AATEQ SRL Brasov

    • Sfântu Gheorghe, România
    • Full time
    • Domeniu - Inginerie: Industrii / Productie

    In aceasta perioada am lucrat ca programator pe strunguri Tong Tai Topper 100 cu comanda Fanuc 10T. Productia consta din serii mici de piese auto cu tolerante medii si mici din otel.Specificul productiei era in capacitatea de a executa piesele dupa desen si specificatii, cu indicatii minime. Pentru situatiile in care trebuiau calculate compensarile de scule sau/si detalii ajutatoare m-am folosit de AutoCad 2006 si Inventor 7. Intrucit sarcinile de productie erau diversificate, ocazional (destul de des) am ocupat functia de pregatirea productiei (Planning Manager). Aici mi-am perfectionat engleza tehnica, intrucit angajatorul, belgian, vorbea doar engleza si franceza.

  • noiembrie 2007 - septembrie 2008

    Programator-reglor-operator CNC, SC BecoTek Metal SRL Brasov

    • Sfântu Gheorghe, România
    • Full time
    • Domeniu - Inginerie: Industrii / Productie

    In aceasta perioada am ocupat o pozitie de programator CNC in aceasta companie care se ocupa de turnarea si prelucrarea de colivii de rulmenti din alama. Pozitia fiind una de "middle manager", sarcinile erau pe masura: programarea productiei pe 2 strunguri CNC mici de tip Wasino SL 25 cu comanda Fanuc(inele sicolivii mici), pe 1 strung mare de tip EMCO 700 cu comanda Sinumerik 840D (acesta executa inele de alama cu diametre pina la aprox. 650 mm)si pe o freza DMU 60 cu comanda Heidenhain iTNC 530 in 5 axe. Pentru generarea programelor m-am folosit de MasterCam X2MR2, pentru care am fost specializat la sediul firmei mari din Amot , Norvegia, in perioada decembrie 2007-februarie 2008. De asemenea, am fost responsabil cu evidenta productiei, a calitatii si a masuratorilor, precum si cu evidenta consumului de scule.

  • septembrie 2004 - august 2007

    Operator CNC, SC INA Schaeffler Brasov

    • Sfântu Gheorghe, România
    • Full time
    • Domeniu - Inginerie: Industrii / Productie

    In aceasta perioada am lucrat ca operator CNC in cadrul segmentului A (Liniar) pe un centru de prelucrare Cincinnati Milacron Maxim 500. Productia consta din serii medii de piese metalice (corpuri de rulmenti liniari)prelucrati la precizie de +/- 0.05 mm. AMC-urile folosite erau atit cele obisnuite (sublere, micrometre electronice) cit si echipamente speciale ca coloana de masura, proiectorul optic sau masina de masurat in coordonate CNC. Sarcinile de productie constau in alimentarea cu piese a masinii, asigurarea calitatii prim masuratori si aplicarea de corectii cind era cazul, evidenta scrisa a productiei, masuratorilor si a consumului de scule.

  • martie 1989 - iunie 2004

    Strungar-frezor de intretinere, CNU SA Bucuresti Sucursala Feldioara

    • Sfântu Gheorghe, România
    • Full time
    • Domeniu - Inginerie: Industrii / Productie

    In aceasta perioada am lucrat ca strungar-frezor universal in Atelierul Mecanic. Acesta asigura necesarul de piese de schimb pentru procesul tehnologic dar si pentru sectiile auxiliare: parcul auto, compresoare, etc. Specificul productiei consta in piese unicate noi sau reconditionate, unele incarcate cu sudura, la precizie maxima.

Educatie

  • 1989 - 2002

    Liceu / scoala profesionala, Liceul Industrial "Hidromecanica" Brasov seral

    • Brașov, România
  • 1983 - 1985

    Liceu / scoala profesionala, Liceul Industrial "Hidromecanica"

    • Brașov, România

Aptitudini

Permis de conducere
  • B

Limbi straine

Engleza
Avansat
Romana
Nativ
75%
  • Last update: 27.03.2011
  • Reference number: 3425

Experience

  • May 2010 - Present

    CNC Turner, SC Schaeffler Romania SRL Brasov

    • Sfântu Gheorghe, Romania
    • Full time
    • Work domain - Engineering: Industries / Production / Manufacturing

    I am working in WZB department, on a Mori Seiki SL 25 CNC lathe, with Fanuc 16T controls.The usualy pieces are made by hardened steel, in very small series.The precision is essential, the tollerances is arround +/- 0.05 mm or even less. The tools compensations is calculated by a integrated CAM system, The operator is responsable for his own quality and measurements. 

  • September 2008 - December 2009

    CNC Programmer-setter-operator, SC AATEQ SRL Brasov

    • Sfântu Gheorghe, Romania
    • Full time
    • Work domain - Engineering: Industries / Production / Manufacturing

    In this period I had a job of programmer-setter-operator on a Tong Tai Topper 100 CNC lathe with Fanuc 10T controlls.My job was to make programs on 6 machines using my knowledges and some AutoCad 2006 help, when necessary. The company products were automotive pieces, in small and medium series, with medium and tight tollerances.Also, I was responsable for the required quality, according to the clients specifications, materials and tools consumptions. Everytime the situation required, I had to make a job of a Planning Manager.

  • November 2007 - September 2008

    CNC Programmer-setter-operator, SC BecoTek Metal SRL Brasov

    • Sfântu Gheorghe, Romania
    • Full time
    • Work domain - Engineering: Industries / Production / Manufacturing

    For this job I had a trainig period (7 weeks) at BecoTek AS Forside Amot,Norway. In this time I learned CNC programming using MasterCam X2MR2 lathe version, and Calypso CMM (CNC measurement machine) at the basic level. Because my position in Brasov Company was a middle manager position, I had to learn details about production, toolls and materials managing. Also, I had to get knowledge about programm and operate a Emco 700 CNC Lathe (with X, Y, Z and C axis,Sinumerik 840D),  Wasino LJ36M (with X, Z and C axis, similar to Victor 36) using Fanuc 10T, and  DMC 60 (5 axes) using Haidenhain iTNC 530. Al the products had the same utility,  bearing cages made by brass,( rough-turned before in another Company department); their size was from 100 mm to 700 mm diameter, with different shape of the pockets. Some pieces had complex shapes  that required specific fixtures, made by myself. The usual procedure was to start from the drawings, then made the nc file on the laptop (with MasterCam), transfer to machine with a RS232 conection, set the proper tools and make the first piece. According to measurements, I had to make some corrections in tool offsets. Also, when necessary, I had to solve the mechanical problems, with some on-line support from the Norwegian maintenance team. Because of the specific of the job, all the conversations with the Norwegian team required strong English knowledge. 
    

  • September 2004 - August 2007

    CNC Operator, SC INA Schaeffler Brasov

    • Sfântu Gheorghe, Romania
    • Full time
    • Work domain - Engineering: Industries / Production / Manufacturing

     Main task:Executing small and medium series steel pieces,(linear bearing body), on Cincinnati Milacron Maxim 500 CNC Milling Machine (with X,Y,Z and C axes), working with tight tolerances (+/- 0.05 mm or less)  using specific  measurement devices (measurement column,  optical projector, electronic calipers and micrometers) keeping the documentation (measurement and production reports). In a usual, common work day my job was to load the material on the machine, run the program and make the measurements. According to results, some parameters needed to be corrected from program or offsets. Also, after a specific period, each tool had to be changed, then her operation checked and corrected, if necessary. In the end, the production reports had to be typed manually on a terminal, by operator.
    

  • March 1989 - June 2004

    Turner- Miller, CNU SA Bucharest

    • Sfântu Gheorghe, Romania
    • Full time
    • Work domain - Engineering: Industries / Production / Manufacturing

        Main task:     Providing spare parts for the technological process, garage and other departments which required maintenance.
    

  • March 1985 - June 1987

    Turner, IAR Ghimbav Brasov Romania

    • Sfântu Gheorghe, Romania
    • Full time
    • Work domain - Engineering: Industries / Production / Manufacturing

    Main task: Executing small batch pieces at tight tolerances, using  aluminium, brass, alloy steel, polyamide and other materials specific to aircraft construction
    

Education

  • 1989 - 1992

    Highschool, "Hidromecanica" Highschool

    • Brașov, Romania
  • 1983 - 1985

    Highschool, "Hidromecanica" Highschool

    • Brașov, Romania

Skills

Driving license
  • B

Foreign languages

English
Advanced
Romanian
Native